About the device
The PWM Driver is intended for manual and automatic testing of actuators (valves, injectors, etc.) in the automotive industry as well as in other industries.
Control:
Button description
-
Up / down arrow are used to move through the menu.
-
The zoom + / - is used to set the step size when changing the frequency and class. The Lupa+ button calls up a QR code on the default screens that pairs the mobile application with the device.
-
Stop is used to turn off the output or return to the menu.
-
Start is used to activate the output. When you press this button, you will hear a long tone, the green light will light up and the wheel in the status bar will start spinning.
-
The rotary encoder is used to select default screens (Manual, Auto, Settings, Programs) and to change values in the menu.
The device is controlled exclusively via buttons and a rotary encoder with acoustic and optical feedback.
Mobile application
The PWM Driver can be paired with the mobile application by pressing the Magnifier+ button on any default screen (Manual, Automatic, Settings, Programs). This will bring up a QR code with a unique MAC address that the mobile app will scan and pair with.
Accessories
-
Power adapter
-
-
Cables banana -> crocodile
-
-
Banana cables -> fastons, mini banana (optional)
-
-
Transport case
Possibility of use
Porovnání verzí
Technical parameters
-
Nominal supply voltage: 12 – 24V DC
-
Minimum and maximum supply voltage: 6 – 30V DC
-
Maximum continuous current draw: 10A
-
Peak current draw: 30A
-
Power supply possible from an adapter or car battery
-
Frequency: 0.1 Hz – 10kHz
-
PWM duty cycle: 1-99%
-
Operation into inductive and resistive loads
-
Dimensions (HxWxD): 125x80x42mm
-
Weight: 300g
